Name ReturnsDescription

AddDimRotated AcadDimRotated Creates an AcadDimRotated object as specified by the parameters. Parameters: ExtLine1Point As Variant, ExtLine2Point As Variant,DimLineLocation As Variant, and RotationAngle As Double. The first three parameters are arrays of three Doubles representing 3-D WCS coordinates.

AddEllipse AcadEllipse Creates an AcadEllipse object representing an ellipse in the XY plane of the WCS as specified by the parameters. Parameters: Center As Variant, MajorAxis As Variant, and RadiusRatio As Double. The first two parameters are arrays of three Doubles representing 3-D WCS coordinates.

AddEllipticalCone Acad3DSolid Creates an Acad3DSolid object representing an elliptical cone in the XY plane of the WCS given the center, major radius, minor radius, and height. Parameters: Center As Variant (an array of three Doubles representing 3-D WCS coordinates), MajorRadius As Double, MinorRadius As Double, and Height As Double.

AddEllipticalCylinder Acad3DSolid Creates an Acad3DSolid object representing an elliptical cylinder as specified by the parameters with its base in the XY plane. Parameters: Center As Variant (an array of three Doubles representing 3-D WCS coordinates), MajorRadius As Double, MinorRadius As Double, and Height As Double.

AddExtrudedSolid Acad3DSolid Creates an Acad3DSolid object representing an extruded solid as specified by the parameters. Parameters: Profile As AcadRegion, Height As Double, and TaperAngle As Double.

The Height parameter specifies the height of the extrusion along the Z-axis of the object's coordinate system. The TaperAngle parameter must be provided in radians. The range of the taper angle is from -90 to +90 degrees. Positive angles taper in from the base; negative angles taper out. The default angle, 0, extrudes a 2-D object perpendicular to its plane. Only 2-D planar regions can be extruded.

AddExtrudedSolid Acad3DSolid Creates an Acad3DSolid object representing an

AlongPath extruded solid, given the profile and an extrusion path.

Only 2-D planar regions can be extruded, and the path shouldn't lie on the same plane as the profile, and it shouldn't have areas of high curvature. Parameters: Profile As AcadRegion and Path As Object.

AddHatch AcadHatch Creates an AcadHatch object as specified by the param eters. Parameters: PatternType As AcPatternType, PatternName As String, and Associativity As Boolean. For a list of possible values for the AcPatternType enumerated type, see Appendix B.

The Associativity parameter is True if the hatch is to be associative and False otherwise. Don't forget to create the outer boundary for the hatch and to append it using Obj.AppendOuterLoop(outerLoop), in which Obj is the newly created hatch and outerLoop is an array of drawing objects forming the hatch boundary. (See the section on the AcadHatch object for details.)

Name

Returns

Was this article helpful?

0 0

Post a comment